For those always striving to improve, the XRC 1200 SPLINE is your ticket
to the top step. Experience enhanced acceleration & fine-tuned agility
to take the lead of the pack. A cutting-edge technique for maximum
carbon layer compression yields our lightest MTB rims yet. Both wheels
are laced with 24 DT revolite spokes. With a lighter rim in front for
increased agility and the back wheel featuring our lightest MTB hub,
it’s our ultimate Cross Country wheelset. The XRC 1200 SPLINE breaks the
mold of your favorite Cross Country setup. Now it’s your turn to break
records.
Hub type
180
with
Ratchet EXP 54
Rim
Carbon, Hookless tubeless TSS
Inner width
30 mm
Spokes
DT revolite® t-head
Rim construction
Maximum layer compression through a cutting-edge carbon construction technique for our lightest MTB rims yet.
Quality control
100 % ready-to-go rim, through a quality control technique scanning each rim down to the layer.
Rims
The rim shape is asymmetrical. They are also differentiated for added strength in the rear rim and lightness in front.
Hub
The 180 straightpull hub is the lightest MTB hub in the range, featuring light & low friction ceramic bearings and the legendary Ratchet EXP system.
Spokes
24 DT revolite spokes, our lightest & strongest MTB spoke in its weight category.
We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our inhouse developed technologies.
Looking for conversion options, spare parts, manuals or how-to videos? Visit our product support.
Find help and answers for frequently asked questions here.
Extended guarantee conditions for Carbon Wheels
According to your selection XRC 1200 SPLINE® we found 2 models. Please use the model finder above to narrow down the models. Select the model for which you need product support.
Find help and answers for frequently asked questions here.
DT Swiss sells its products exclusively via official dealers, some of which also have online shops. Please contact your dealer. Or contact the distributor for your country – please use the contact form and select your country first, followed by "Product availability" as the subject.
Unfortunately we don't offer discounts; we don't sell directly to private customers. Please contact a dealer. You can find recommended retail prices on our website.
Compare the products on our website, where you can find our entire range and all technical specifications. Use the Wheel Finder to find the right wheel in just a few clicks.
Alternatively, contact a dealer – they know all about DT Swiss products and technologies and can advise you.
Use our Wheel Finder to find the right wheel for your bike and requirements in only a few steps. If you have any further questions or would like advice, please contact a dealer. They'll be happy to help you.
The current DT Swiss wheels are tubeless-ready and come with mounted tubeless rim tape and corresponding valves. For conversion, you will need a tubeless-capable tire (optimal: UST) and tire sealant. You can find both at an official dealer. Our How To video will take you through step-by-step assembly.
If you have previously ridden your bike with a tube or if the tape no longer sticks properly to the rim, we recommend that you replace the rim tape as a precaution.
How to attach the tubeless rim tape:
1. Measure the inside width of the rim.
2. The tubeless rim tape should be approx. 2 mm wider than the rim and can be bought from a specialist store.
3. Apply the tubeless rim tape. Depending on the rim/tire combination, it may be helpful to apply two or three layers of tubeless rim tape to optimally seal the rim bed.
By buying a DT Swiss carbon wheel, you will benefit from the Fair Share Policy which allows you to profit from a crash replacement service for your wheels, available for 10 years after purchase.
Would you rather race or swim? 🌊
@thehannahotto took on the Mediterranean Epic in Oropesa del Mar – Castellón, Spain, riding our XRC 1200 SPLINE.
Send this to someone who prefers biking over swimming, even when they are near water. 🚴♀️
📸: @canofotosports#BeachBiking#Cycling#MTB#DTSwiss
An industry disrupting rim manufacturing process and a layer-by-layer nondestructive inspection of every product creates light yet durable rims for a long-lasting riding experience. The patent-pending outer carbon layer enables an unrivaled high-quality finish on the rim surface, meaning it is ready-to-go, straight out of the mold.
The 1200 wheels are supported with carbon layers that enclose the entire rim to solidify the rim horns through long and uninterrupted fibers.
Discover more about the new carbon mold technology with our link in bio!
#EngineeringPerformance#MeticulousDevelopment#MTB#Bike#Wheels#BreakTheMold
Break the mold! Discover the new 1200 wheels. An innovative rim manufacturing process, paired with component adjustments tailored to each riding style results in the finest tuned systems to meet your highest expectations.
These wheels are for those who are always striving to improve, who are not afraid of breaking the mold.
Check out the new wheels with our link in bio!
#EngineeringPerformance#MeticulousDevelopment#MTB#Bike#Wheels#BreakTheMold
